Current File : //home/tradevaly/www/node_modules/echarts/lib/stream/Scheduler.js

/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements.  See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership.  The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License.  You may obtain a copy of the License at
*
*   http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied.  See the License for the
* specific language governing permissions and limitations
* under the License.
*/

var _util = require("zrender/lib/core/util");

var each = _util.each;
var map = _util.map;
var isFunction = _util.isFunction;
var createHashMap = _util.createHashMap;
var noop = _util.noop;

var _task = require("./task");

var createTask = _task.createTask;

var _component = require("../util/component");

var getUID = _component.getUID;

var GlobalModel = require("../model/Global");

var ExtensionAPI = require("../ExtensionAPI");

var _model = require("../util/model");

var normalizeToArray = _model.normalizeToArray;

/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements.  See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership.  The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License.  You may obtain a copy of the License at
*
*   http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied.  See the License for the
* specific language governing permissions and limitations
* under the License.
*/

/**
 * @module echarts/stream/Scheduler
 */

/**
 * @constructor
 */
function Scheduler(ecInstance, api, dataProcessorHandlers, visualHandlers) {
  this.ecInstance = ecInstance;
  this.api = api;
  this.unfinished; // Fix current processors in case that in some rear cases that
  // processors might be registered after echarts instance created.
  // Register processors incrementally for a echarts instance is
  // not supported by this stream architecture.

  var dataProcessorHandlers = this._dataProcessorHandlers = dataProcessorHandlers.slice();
  var visualHandlers = this._visualHandlers = visualHandlers.slice();
  this._allHandlers = dataProcessorHandlers.concat(visualHandlers);
  /**
   * @private
   * @type {
   *     [handlerUID: string]: {
   *         seriesTaskMap?: {
   *             [seriesUID: string]: Task
   *         },
   *         overallTask?: Task
   *     }
   * }
   */

  this._stageTaskMap = createHashMap();
}

var proto = Scheduler.prototype;
/**
 * @param {module:echarts/model/Global} ecModel
 * @param {Object} payload
 */

proto.restoreData = function (ecModel, payload) {
  // TODO: Only restore needed series and components, but not all components.
  // Currently `restoreData` of all of the series and component will be called.
  // But some independent components like `title`, `legend`, `graphic`, `toolbox`,
  // `tooltip`, `axisPointer`, etc, do not need series refresh when `setOption`,
  // and some components like coordinate system, axes, dataZoom, visualMap only
  // need their target series refresh.
  // (1) If we are implementing this feature some day, we should consider these cases:
  // if a data processor depends on a component (e.g., dataZoomProcessor depends
  // on the settings of `dataZoom`), it should be re-performed if the component
  // is modified by `setOption`.
  // (2) If a processor depends on sevral series, speicified by its `getTargetSeries`,
  // it should be re-performed when the result array of `getTargetSeries` changed.
  // We use `dependencies` to cover these issues.
  // (3) How to update target series when coordinate system related components modified.
  // TODO: simply the dirty mechanism? Check whether only the case here can set tasks dirty,
  // and this case all of the tasks will be set as dirty.
  ecModel.restoreData(payload); // Theoretically an overall task not only depends on each of its target series, but also
  // depends on all of the series.
  // The overall task is not in pipeline, and `ecModel.restoreData` only set pipeline tasks
  // dirty. If `getTargetSeries` of an overall task returns nothing, we should also ensure
  // that the overall task is set as dirty and to be performed, otherwise it probably cause
  // state chaos. So we have to set dirty of all of the overall tasks manually, otherwise it
  // probably cause state chaos (consider `dataZoomProcessor`).

  this._stageTaskMap.each(function (taskRecord) {
    var overallTask = taskRecord.overallTask;
    overallTask && overallTask.dirty();
  });
}; // If seriesModel provided, incremental threshold is check by series data.


proto.getPerformArgs = function (task, isBlock) {
  // For overall task
  if (!task.__pipeline) {
    return;
  }

  var pipeline = this._pipelineMap.get(task.__pipeline.id);

  var pCtx = pipeline.context;
  var incremental = !isBlock && pipeline.progressiveEnabled && (!pCtx || pCtx.progressiveRender) && task.__idxInPipeline > pipeline.blockIndex;
  var step = incremental ? pipeline.step : null;
  var modDataCount = pCtx && pCtx.modDataCount;
  var modBy = modDataCount != null ? Math.ceil(modDataCount / step) : null;
  return {
    step: step,
    modBy: modBy,
    modDataCount: modDataCount
  };
};

proto.getPipeline = function (pipelineId) {
  return this._pipelineMap.get(pipelineId);
};
/**
 * Current, progressive rendering starts from visual and layout.
 * Always detect render mode in the same stage, avoiding that incorrect
 * detection caused by data filtering.
 * Caution:
 * `updateStreamModes` use `seriesModel.getData()`.
 */


proto.updateStreamModes = function (seriesModel, view) {
  var pipeline = this._pipelineMap.get(seriesModel.uid);

  var data = seriesModel.getData();
  var dataLen = data.count(); // `progressiveRender` means that can render progressively in each
  // animation frame. Note that some types of series do not provide
  // `view.incrementalPrepareRender` but support `chart.appendData`. We
  // use the term `incremental` but not `progressive` to describe the
  // case that `chart.appendData`.

  var progressiveRender = pipeline.progressiveEnabled && view.incrementalPrepareRender && dataLen >= pipeline.threshold;
  var large = seriesModel.get('large') && dataLen >= seriesModel.get('largeThreshold'); // TODO: modDataCount should not updated if `appendData`, otherwise cause whole repaint.
  // see `test/candlestick-large3.html`

  var modDataCount = seriesModel.get('progressiveChunkMode') === 'mod' ? dataLen : null;
  seriesModel.pipelineContext = pipeline.context = {
    progressiveRender: progressiveRender,
    modDataCount: modDataCount,
    large: large
  };
};

proto.restorePipelines = function (ecModel) {
  var scheduler = this;
  var pipelineMap = scheduler._pipelineMap = createHashMap();
  ecModel.eachSeries(function (seriesModel) {
    var progressive = seriesModel.getProgressive();
    var pipelineId = seriesModel.uid;
    pipelineMap.set(pipelineId, {
      id: pipelineId,
      head: null,
      tail: null,
      threshold: seriesModel.getProgressiveThreshold(),
      progressiveEnabled: progressive && !(seriesModel.preventIncremental && seriesModel.preventIncremental()),
      blockIndex: -1,
      step: Math.round(progressive || 700),
      count: 0
    });
    pipe(scheduler, seriesModel, seriesModel.dataTask);
  });
};

proto.prepareStageTasks = function () {
  var stageTaskMap = this._stageTaskMap;
  var ecModel = this.ecInstance.getModel();
  var api = this.api;
  each(this._allHandlers, function (handler) {
    var record = stageTaskMap.get(handler.uid) || stageTaskMap.set(handler.uid, []);
    handler.reset && createSeriesStageTask(this, handler, record, ecModel, api);
    handler.overallReset && createOverallStageTask(this, handler, record, ecModel, api);
  }, this);
};

proto.prepareView = function (view, model, ecModel, api) {
  var renderTask = view.renderTask;
  var context = renderTask.context;
  context.model = model;
  context.ecModel = ecModel;
  context.api = api;
  renderTask.__block = !view.incrementalPrepareRender;
  pipe(this, model, renderTask);
};

proto.performDataProcessorTasks = function (ecModel, payload) {
  // If we do not use `block` here, it should be considered when to update modes.
  performStageTasks(this, this._dataProcessorHandlers, ecModel, payload, {
    block: true
  });
}; // opt
// opt.visualType: 'visual' or 'layout'
// opt.setDirty


proto.performVisualTasks = function (ecModel, payload, opt) {
  performStageTasks(this, this._visualHandlers, ecModel, payload, opt);
};

function performStageTasks(scheduler, stageHandlers, ecModel, payload, opt) {
  opt = opt || {};
  var unfinished;
  each(stageHandlers, function (stageHandler, idx) {
    if (opt.visualType && opt.visualType !== stageHandler.visualType) {
      return;
    }

    var stageHandlerRecord = scheduler._stageTaskMap.get(stageHandler.uid);

    var seriesTaskMap = stageHandlerRecord.seriesTaskMap;
    var overallTask = stageHandlerRecord.overallTask;

    if (overallTask) {
      var overallNeedDirty;
      var agentStubMap = overallTask.agentStubMap;
      agentStubMap.each(function (stub) {
        if (needSetDirty(opt, stub)) {
          stub.dirty();
          overallNeedDirty = true;
        }
      });
      overallNeedDirty && overallTask.dirty();
      updatePayload(overallTask, payload);
      var performArgs = scheduler.getPerformArgs(overallTask, opt.block); // Execute stubs firstly, which may set the overall task dirty,
      // then execute the overall task. And stub will call seriesModel.setData,
      // which ensures that in the overallTask seriesModel.getData() will not
      // return incorrect data.

      agentStubMap.each(function (stub) {
        stub.perform(performArgs);
      });
      unfinished |= overallTask.perform(performArgs);
    } else if (seriesTaskMap) {
      seriesTaskMap.each(function (task, pipelineId) {
        if (needSetDirty(opt, task)) {
          task.dirty();
        }

        var performArgs = scheduler.getPerformArgs(task, opt.block); // FIXME
        // if intending to decalare `performRawSeries` in handlers, only
        // stream-independent (specifically, data item independent) operations can be
        // performed. Because is a series is filtered, most of the tasks will not
        // be performed. A stream-dependent operation probably cause wrong biz logic.
        // Perhaps we should not provide a separate callback for this case instead
        // of providing the config `performRawSeries`. The stream-dependent operaions
        // and stream-independent operations should better not be mixed.

        performArgs.skip = !stageHandler.performRawSeries && ecModel.isSeriesFiltered(task.context.model);
        updatePayload(task, payload);
        unfinished |= task.perform(performArgs);
      });
    }
  });

  function needSetDirty(opt, task) {
    return opt.setDirty && (!opt.dirtyMap || opt.dirtyMap.get(task.__pipeline.id));
  }

  scheduler.unfinished |= unfinished;
}

proto.performSeriesTasks = function (ecModel) {
  var unfinished;
  ecModel.eachSeries(function (seriesModel) {
    // Progress to the end for dataInit and dataRestore.
    unfinished |= seriesModel.dataTask.perform();
  });
  this.unfinished |= unfinished;
};

proto.plan = function () {
  // Travel pipelines, check block.
  this._pipelineMap.each(function (pipeline) {
    var task = pipeline.tail;

    do {
      if (task.__block) {
        pipeline.blockIndex = task.__idxInPipeline;
        break;
      }

      task = task.getUpstream();
    } while (task);
  });
};

var updatePayload = proto.updatePayload = function (task, payload) {
  payload !== 'remain' && (task.context.payload = payload);
};

function createSeriesStageTask(scheduler, stageHandler, stageHandlerRecord, ecModel, api) {
  var seriesTaskMap = stageHandlerRecord.seriesTaskMap || (stageHandlerRecord.seriesTaskMap = createHashMap());
  var seriesType = stageHandler.seriesType;
  var getTargetSeries = stageHandler.getTargetSeries; // If a stageHandler should cover all series, `createOnAllSeries` should be declared mandatorily,
  // to avoid some typo or abuse. Otherwise if an extension do not specify a `seriesType`,
  // it works but it may cause other irrelevant charts blocked.

  if (stageHandler.createOnAllSeries) {
    ecModel.eachRawSeries(create);
  } else if (seriesType) {
    ecModel.eachRawSeriesByType(seriesType, create);
  } else if (getTargetSeries) {
    getTargetSeries(ecModel, api).each(create);
  }

  function create(seriesModel) {
    var pipelineId = seriesModel.uid; // Init tasks for each seriesModel only once.
    // Reuse original task instance.

    var task = seriesTaskMap.get(pipelineId) || seriesTaskMap.set(pipelineId, createTask({
      plan: seriesTaskPlan,
      reset: seriesTaskReset,
      count: seriesTaskCount
    }));
    task.context = {
      model: seriesModel,
      ecModel: ecModel,
      api: api,
      useClearVisual: stageHandler.isVisual && !stageHandler.isLayout,
      plan: stageHandler.plan,
      reset: stageHandler.reset,
      scheduler: scheduler
    };
    pipe(scheduler, seriesModel, task);
  } // Clear unused series tasks.


  var pipelineMap = scheduler._pipelineMap;
  seriesTaskMap.each(function (task, pipelineId) {
    if (!pipelineMap.get(pipelineId)) {
      task.dispose();
      seriesTaskMap.removeKey(pipelineId);
    }
  });
}

function createOverallStageTask(scheduler, stageHandler, stageHandlerRecord, ecModel, api) {
  var overallTask = stageHandlerRecord.overallTask = stageHandlerRecord.overallTask // For overall task, the function only be called on reset stage.
  || createTask({
    reset: overallTaskReset
  });
  overallTask.context = {
    ecModel: ecModel,
    api: api,
    overallReset: stageHandler.overallReset,
    scheduler: scheduler
  }; // Reuse orignal stubs.

  var agentStubMap = overallTask.agentStubMap = overallTask.agentStubMap || createHashMap();
  var seriesType = stageHandler.seriesType;
  var getTargetSeries = stageHandler.getTargetSeries;
  var overallProgress = true;
  var modifyOutputEnd = stageHandler.modifyOutputEnd; // An overall task with seriesType detected or has `getTargetSeries`, we add
  // stub in each pipelines, it will set the overall task dirty when the pipeline
  // progress. Moreover, to avoid call the overall task each frame (too frequent),
  // we set the pipeline block.

  if (seriesType) {
    ecModel.eachRawSeriesByType(seriesType, createStub);
  } else if (getTargetSeries) {
    getTargetSeries(ecModel, api).each(createStub);
  } // Otherwise, (usually it is legancy case), the overall task will only be
  // executed when upstream dirty. Otherwise the progressive rendering of all
  // pipelines will be disabled unexpectedly. But it still needs stubs to receive
  // dirty info from upsteam.
  else {
      overallProgress = false;
      each(ecModel.getSeries(), createStub);
    }

  function createStub(seriesModel) {
    var pipelineId = seriesModel.uid;
    var stub = agentStubMap.get(pipelineId);

    if (!stub) {
      stub = agentStubMap.set(pipelineId, createTask({
        reset: stubReset,
        onDirty: stubOnDirty
      })); // When the result of `getTargetSeries` changed, the overallTask
      // should be set as dirty and re-performed.

      overallTask.dirty();
    }

    stub.context = {
      model: seriesModel,
      overallProgress: overallProgress,
      modifyOutputEnd: modifyOutputEnd
    };
    stub.agent = overallTask;
    stub.__block = overallProgress;
    pipe(scheduler, seriesModel, stub);
  } // Clear unused stubs.


  var pipelineMap = scheduler._pipelineMap;
  agentStubMap.each(function (stub, pipelineId) {
    if (!pipelineMap.get(pipelineId)) {
      stub.dispose(); // When the result of `getTargetSeries` changed, the overallTask
      // should be set as dirty and re-performed.

      overallTask.dirty();
      agentStubMap.removeKey(pipelineId);
    }
  });
}

function overallTaskReset(context) {
  context.overallReset(context.ecModel, context.api, context.payload);
}

function stubReset(context, upstreamContext) {
  return context.overallProgress && stubProgress;
}

function stubProgress() {
  this.agent.dirty();
  this.getDownstream().dirty();
}

function stubOnDirty() {
  this.agent && this.agent.dirty();
}

function seriesTaskPlan(context) {
  return context.plan && context.plan(context.model, context.ecModel, context.api, context.payload);
}

function seriesTaskReset(context) {
  if (context.useClearVisual) {
    context.data.clearAllVisual();
  }

  var resetDefines = context.resetDefines = normalizeToArray(context.reset(context.model, context.ecModel, context.api, context.payload));
  return resetDefines.length > 1 ? map(resetDefines, function (v, idx) {
    return makeSeriesTaskProgress(idx);
  }) : singleSeriesTaskProgress;
}

var singleSeriesTaskProgress = makeSeriesTaskProgress(0);

function makeSeriesTaskProgress(resetDefineIdx) {
  return function (params, context) {
    var data = context.data;
    var resetDefine = context.resetDefines[resetDefineIdx];

    if (resetDefine && resetDefine.dataEach) {
      for (var i = params.start; i < params.end; i++) {
        resetDefine.dataEach(data, i);
      }
    } else if (resetDefine && resetDefine.progress) {
      resetDefine.progress(params, data);
    }
  };
}

function seriesTaskCount(context) {
  return context.data.count();
}

function pipe(scheduler, seriesModel, task) {
  var pipelineId = seriesModel.uid;

  var pipeline = scheduler._pipelineMap.get(pipelineId);

  !pipeline.head && (pipeline.head = task);
  pipeline.tail && pipeline.tail.pipe(task);
  pipeline.tail = task;
  task.__idxInPipeline = pipeline.count++;
  task.__pipeline = pipeline;
}

Scheduler.wrapStageHandler = function (stageHandler, visualType) {
  if (isFunction(stageHandler)) {
    stageHandler = {
      overallReset: stageHandler,
      seriesType: detectSeriseType(stageHandler)
    };
  }

  stageHandler.uid = getUID('stageHandler');
  visualType && (stageHandler.visualType = visualType);
  return stageHandler;
};
/**
 * Only some legacy stage handlers (usually in echarts extensions) are pure function.
 * To ensure that they can work normally, they should work in block mode, that is,
 * they should not be started util the previous tasks finished. So they cause the
 * progressive rendering disabled. We try to detect the series type, to narrow down
 * the block range to only the series type they concern, but not all series.
 */


function detectSeriseType(legacyFunc) {
  seriesType = null;

  try {
    // Assume there is no async when calling `eachSeriesByType`.
    legacyFunc(ecModelMock, apiMock);
  } catch (e) {}

  return seriesType;
}

var ecModelMock = {};
var apiMock = {};
var seriesType;
mockMethods(ecModelMock, GlobalModel);
mockMethods(apiMock, ExtensionAPI);

ecModelMock.eachSeriesByType = ecModelMock.eachRawSeriesByType = function (type) {
  seriesType = type;
};

ecModelMock.eachComponent = function (cond) {
  if (cond.mainType === 'series' && cond.subType) {
    seriesType = cond.subType;
  }
};

function mockMethods(target, Clz) {
  /* eslint-disable */
  for (var name in Clz.prototype) {
    // Do not use hasOwnProperty
    target[name] = noop;
  }
  /* eslint-enable */

}

var _default = Scheduler;
module.exports = _default;