| Current File : //proc/thread-self/root/proc/self/root/opt/alt/python34/lib64/python3.4/bz2.py |
"""Interface to the libbzip2 compression library.
This module provides a file interface, classes for incremental
(de)compression, and functions for one-shot (de)compression.
"""
__all__ = ["BZ2File", "BZ2Compressor", "BZ2Decompressor",
"open", "compress", "decompress"]
__author__ = "Nadeem Vawda <nadeem.vawda@gmail.com>"
from builtins import open as _builtin_open
import io
import warnings
try:
from threading import RLock
except ImportError:
from dummy_threading import RLock
from _bz2 import BZ2Compressor, BZ2Decompressor
_MODE_CLOSED = 0
_MODE_READ = 1
_MODE_READ_EOF = 2
_MODE_WRITE = 3
_BUFFER_SIZE = 8192
class BZ2File(io.BufferedIOBase):
"""A file object providing transparent bzip2 (de)compression.
A BZ2File can act as a wrapper for an existing file object, or refer
directly to a named file on disk.
Note that BZ2File provides a *binary* file interface - data read is
returned as bytes, and data to be written should be given as bytes.
"""
def __init__(self, filename, mode="r", buffering=None, compresslevel=9):
"""Open a bzip2-compressed file.
If filename is a str or bytes object, it gives the name
of the file to be opened. Otherwise, it should be a file object,
which will be used to read or write the compressed data.
mode can be 'r' for reading (default), 'w' for (over)writing,
'x' for creating exclusively, or 'a' for appending. These can
equivalently be given as 'rb', 'wb', 'xb', and 'ab'.
buffering is ignored. Its use is deprecated.
If mode is 'w', 'x' or 'a', compresslevel can be a number between 1
and 9 specifying the level of compression: 1 produces the least
compression, and 9 (default) produces the most compression.
If mode is 'r', the input file may be the concatenation of
multiple compressed streams.
"""
# This lock must be recursive, so that BufferedIOBase's
# readline(), readlines() and writelines() don't deadlock.
self._lock = RLock()
self._fp = None
self._closefp = False
self._mode = _MODE_CLOSED
self._pos = 0
self._size = -1
if buffering is not None:
warnings.warn("Use of 'buffering' argument is deprecated",
DeprecationWarning)
if not (1 <= compresslevel <= 9):
raise ValueError("compresslevel must be between 1 and 9")
if mode in ("", "r", "rb"):
mode = "rb"
mode_code = _MODE_READ
self._decompressor = BZ2Decompressor()
self._buffer = b""
self._buffer_offset = 0
elif mode in ("w", "wb"):
mode = "wb"
mode_code = _MODE_WRITE
self._compressor = BZ2Compressor(compresslevel)
elif mode in ("x", "xb"):
mode = "xb"
mode_code = _MODE_WRITE
self._compressor = BZ2Compressor(compresslevel)
elif mode in ("a", "ab"):
mode = "ab"
mode_code = _MODE_WRITE
self._compressor = BZ2Compressor(compresslevel)
else:
raise ValueError("Invalid mode: %r" % (mode,))
if isinstance(filename, (str, bytes)):
self._fp = _builtin_open(filename, mode)
self._closefp = True
self._mode = mode_code
elif hasattr(filename, "read") or hasattr(filename, "write"):
self._fp = filename
self._mode = mode_code
else:
raise TypeError("filename must be a str or bytes object, or a file")
def close(self):
"""Flush and close the file.
May be called more than once without error. Once the file is
closed, any other operation on it will raise a ValueError.
"""
with self._lock:
if self._mode == _MODE_CLOSED:
return
try:
if self._mode in (_MODE_READ, _MODE_READ_EOF):
self._decompressor = None
elif self._mode == _MODE_WRITE:
self._fp.write(self._compressor.flush())
self._compressor = None
finally:
try:
if self._closefp:
self._fp.close()
finally:
self._fp = None
self._closefp = False
self._mode = _MODE_CLOSED
self._buffer = b""
self._buffer_offset = 0
@property
def closed(self):
"""True if this file is closed."""
return self._mode == _MODE_CLOSED
def fileno(self):
"""Return the file descriptor for the underlying file."""
self._check_not_closed()
return self._fp.fileno()
def seekable(self):
"""Return whether the file supports seeking."""
return self.readable() and self._fp.seekable()
def readable(self):
"""Return whether the file was opened for reading."""
self._check_not_closed()
return self._mode in (_MODE_READ, _MODE_READ_EOF)
def writable(self):
"""Return whether the file was opened for writing."""
self._check_not_closed()
return self._mode == _MODE_WRITE
# Mode-checking helper functions.
def _check_not_closed(self):
if self.closed:
raise ValueError("I/O operation on closed file")
def _check_can_read(self):
if self._mode not in (_MODE_READ, _MODE_READ_EOF):
self._check_not_closed()
raise io.UnsupportedOperation("File not open for reading")
def _check_can_write(self):
if self._mode != _MODE_WRITE:
self._check_not_closed()
raise io.UnsupportedOperation("File not open for writing")
def _check_can_seek(self):
if self._mode not in (_MODE_READ, _MODE_READ_EOF):
self._check_not_closed()
raise io.UnsupportedOperation("Seeking is only supported "
"on files open for reading")
if not self._fp.seekable():
raise io.UnsupportedOperation("The underlying file object "
"does not support seeking")
# Fill the readahead buffer if it is empty. Returns False on EOF.
def _fill_buffer(self):
if self._mode == _MODE_READ_EOF:
return False
# Depending on the input data, our call to the decompressor may not
# return any data. In this case, try again after reading another block.
while self._buffer_offset == len(self._buffer):
rawblock = (self._decompressor.unused_data or
self._fp.read(_BUFFER_SIZE))
if not rawblock:
if self._decompressor.eof:
# End-of-stream marker and end of file. We're good.
self._mode = _MODE_READ_EOF
self._size = self._pos
return False
else:
# Problem - we were expecting more compressed data.
raise EOFError("Compressed file ended before the "
"end-of-stream marker was reached")
if self._decompressor.eof:
# Continue to next stream.
self._decompressor = BZ2Decompressor()
try:
self._buffer = self._decompressor.decompress(rawblock)
except OSError:
# Trailing data isn't a valid bzip2 stream. We're done here.
self._mode = _MODE_READ_EOF
self._size = self._pos
return False
else:
self._buffer = self._decompressor.decompress(rawblock)
self._buffer_offset = 0
return True
# Read data until EOF.
# If return_data is false, consume the data without returning it.
def _read_all(self, return_data=True):
# The loop assumes that _buffer_offset is 0. Ensure that this is true.
self._buffer = self._buffer[self._buffer_offset:]
self._buffer_offset = 0
blocks = []
while self._fill_buffer():
if return_data:
blocks.append(self._buffer)
self._pos += len(self._buffer)
self._buffer = b""
if return_data:
return b"".join(blocks)
# Read a block of up to n bytes.
# If return_data is false, consume the data without returning it.
def _read_block(self, n, return_data=True):
# If we have enough data buffered, return immediately.
end = self._buffer_offset + n
if end <= len(self._buffer):
data = self._buffer[self._buffer_offset : end]
self._buffer_offset = end
self._pos += len(data)
return data if return_data else None
# The loop assumes that _buffer_offset is 0. Ensure that this is true.
self._buffer = self._buffer[self._buffer_offset:]
self._buffer_offset = 0
blocks = []
while n > 0 and self._fill_buffer():
if n < len(self._buffer):
data = self._buffer[:n]
self._buffer_offset = n
else:
data = self._buffer
self._buffer = b""
if return_data:
blocks.append(data)
self._pos += len(data)
n -= len(data)
if return_data:
return b"".join(blocks)
def peek(self, n=0):
"""Return buffered data without advancing the file position.
Always returns at least one byte of data, unless at EOF.
The exact number of bytes returned is unspecified.
"""
with self._lock:
self._check_can_read()
if not self._fill_buffer():
return b""
return self._buffer[self._buffer_offset:]
def read(self, size=-1):
"""Read up to size uncompressed bytes from the file.
If size is negative or omitted, read until EOF is reached.
Returns b'' if the file is already at EOF.
"""
with self._lock:
self._check_can_read()
if size == 0:
return b""
elif size < 0:
return self._read_all()
else:
return self._read_block(size)
def read1(self, size=-1):
"""Read up to size uncompressed bytes, while trying to avoid
making multiple reads from the underlying stream.
Returns b'' if the file is at EOF.
"""
# Usually, read1() calls _fp.read() at most once. However, sometimes
# this does not give enough data for the decompressor to make progress.
# In this case we make multiple reads, to avoid returning b"".
with self._lock:
self._check_can_read()
if (size == 0 or
# Only call _fill_buffer() if the buffer is actually empty.
# This gives a significant speedup if *size* is small.
(self._buffer_offset == len(self._buffer) and not self._fill_buffer())):
return b""
if size > 0:
data = self._buffer[self._buffer_offset :
self._buffer_offset + size]
self._buffer_offset += len(data)
else:
data = self._buffer[self._buffer_offset:]
self._buffer = b""
self._buffer_offset = 0
self._pos += len(data)
return data
def readinto(self, b):
"""Read up to len(b) bytes into b.
Returns the number of bytes read (0 for EOF).
"""
with self._lock:
return io.BufferedIOBase.readinto(self, b)
def readline(self, size=-1):
"""Read a line of uncompressed bytes from the file.
The terminating newline (if present) is retained. If size is
non-negative, no more than size bytes will be read (in which
case the line may be incomplete). Returns b'' if already at EOF.
"""
if not isinstance(size, int):
if not hasattr(size, "__index__"):
raise TypeError("Integer argument expected")
size = size.__index__()
with self._lock:
self._check_can_read()
# Shortcut for the common case - the whole line is in the buffer.
if size < 0:
end = self._buffer.find(b"\n", self._buffer_offset) + 1
if end > 0:
line = self._buffer[self._buffer_offset : end]
self._buffer_offset = end
self._pos += len(line)
return line
return io.BufferedIOBase.readline(self, size)
def readlines(self, size=-1):
"""Read a list of lines of uncompressed bytes from the file.
size can be specified to control the number of lines read: no
further lines will be read once the total size of the lines read
so far equals or exceeds size.
"""
if not isinstance(size, int):
if not hasattr(size, "__index__"):
raise TypeError("Integer argument expected")
size = size.__index__()
with self._lock:
return io.BufferedIOBase.readlines(self, size)
def write(self, data):
"""Write a byte string to the file.
Returns the number of uncompressed bytes written, which is
always len(data). Note that due to buffering, the file on disk
may not reflect the data written until close() is called.
"""
with self._lock:
self._check_can_write()
compressed = self._compressor.compress(data)
self._fp.write(compressed)
self._pos += len(data)
return len(data)
def writelines(self, seq):
"""Write a sequence of byte strings to the file.
Returns the number of uncompressed bytes written.
seq can be any iterable yielding byte strings.
Line separators are not added between the written byte strings.
"""
with self._lock:
return io.BufferedIOBase.writelines(self, seq)
# Rewind the file to the beginning of the data stream.
def _rewind(self):
self._fp.seek(0, 0)
self._mode = _MODE_READ
self._pos = 0
self._decompressor = BZ2Decompressor()
self._buffer = b""
self._buffer_offset = 0
def seek(self, offset, whence=0):
"""Change the file position.
The new position is specified by offset, relative to the
position indicated by whence. Values for whence are:
0: start of stream (default); offset must not be negative
1: current stream position
2: end of stream; offset must not be positive
Returns the new file position.
Note that seeking is emulated, so depending on the parameters,
this operation may be extremely slow.
"""
with self._lock:
self._check_can_seek()
# Recalculate offset as an absolute file position.
if whence == 0:
pass
elif whence == 1:
offset = self._pos + offset
elif whence == 2:
# Seeking relative to EOF - we need to know the file's size.
if self._size < 0:
self._read_all(return_data=False)
offset = self._size + offset
else:
raise ValueError("Invalid value for whence: %s" % (whence,))
# Make it so that offset is the number of bytes to skip forward.
if offset < self._pos:
self._rewind()
else:
offset -= self._pos
# Read and discard data until we reach the desired position.
self._read_block(offset, return_data=False)
return self._pos
def tell(self):
"""Return the current file position."""
with self._lock:
self._check_not_closed()
return self._pos
def open(filename, mode="rb", compresslevel=9,
encoding=None, errors=None, newline=None):
"""Open a bzip2-compressed file in binary or text mode.
The filename argument can be an actual filename (a str or bytes
object), or an existing file object to read from or write to.
The mode argument can be "r", "rb", "w", "wb", "x", "xb", "a" or
"ab" for binary mode, or "rt", "wt", "xt" or "at" for text mode.
The default mode is "rb", and the default compresslevel is 9.
For binary mode, this function is equivalent to the BZ2File
constructor: BZ2File(filename, mode, compresslevel). In this case,
the encoding, errors and newline arguments must not be provided.
For text mode, a BZ2File object is created, and wrapped in an
io.TextIOWrapper instance with the specified encoding, error
handling behavior, and line ending(s).
"""
if "t" in mode:
if "b" in mode:
raise ValueError("Invalid mode: %r" % (mode,))
else:
if encoding is not None:
raise ValueError("Argument 'encoding' not supported in binary mode")
if errors is not None:
raise ValueError("Argument 'errors' not supported in binary mode")
if newline is not None:
raise ValueError("Argument 'newline' not supported in binary mode")
bz_mode = mode.replace("t", "")
binary_file = BZ2File(filename, bz_mode, compresslevel=compresslevel)
if "t" in mode:
return io.TextIOWrapper(binary_file, encoding, errors, newline)
else:
return binary_file
def compress(data, compresslevel=9):
"""Compress a block of data.
compresslevel, if given, must be a number between 1 and 9.
For incremental compression, use a BZ2Compressor object instead.
"""
comp = BZ2Compressor(compresslevel)
return comp.compress(data) + comp.flush()
def decompress(data):
"""Decompress a block of data.
For incremental decompression, use a BZ2Decompressor object instead.
"""
results = []
while data:
decomp = BZ2Decompressor()
try:
res = decomp.decompress(data)
except OSError:
if results:
break # Leftover data is not a valid bzip2 stream; ignore it.
else:
raise # Error on the first iteration; bail out.
results.append(res)
if not decomp.eof:
raise ValueError("Compressed data ended before the "
"end-of-stream marker was reached")
data = decomp.unused_data
return b"".join(results)